Expert Panel Discussion on Considerations for Heater Optimization and Future — Part 1
Gasoline Processes
Facilitator:
Matt Hutchinson, Axens North America
Moderator:
Joong Yang, Chevron U.S.A. Inc.
Panel:
Amit Gupta, Heurtey Petrochem Solutions
Bill McLaughlin, ExxonMobil Product Solutions Company
Ethan Spielvogel, Marathon Petroleum Corp.
Randy Stier, Valero Energy Corporation
Vivek Sundaram, LyondellBassel Industries
We are producing petroleum products in the current environment in which emissions reduction is demanded amidst rising consumer demand. The panel discussion will focus on safe operation and optimization of process fired heaters, including limitations with existing technologies to reduce emissions, and challenges with emerging technologies, e.g., hydrogen firing and electrification.
Speakers
Session Start End
-
CSB Lessons Learned: Fired Heater Tubing Failure
Fired Heater, Lessons Learned
The CSB will discuss its investigation of the November 19, 2023, fired heater tube rupture at a refinery in Martinez, California. The incident occurred during the initial startup of a renewable diesel hydroprocessing unit, resulting in a fire that seriously injured one employee. Topics will include fired heater safe operating limits, worker proximity to fired heaters, safety instrumented systems that detect low process flow into fired heaters, burner operation, valve misalignments, and corporate oversight.
Participants will: Gain an understanding of both the process-side and combustion-side causes that contributed to the tube rupture; Identify potential deficiencies that may exist at their own units; and Review the CSB’s industry recommendation to API for suggested revisions to API RP 556 (Instrumentation, Control, and Protective Systems for Gas Fired Heaters).
Moderator:
Willis Jernigan, AFPM
Speaker:
Melike Yersiz, U.S. Chemical Safety Board
Speakers
Session Start End
-
Topic
SMR Heater Tube Inspection and Reliability
Lessons Learned, Fired Heater, Hydroprocessing
This session will cover the topic of using a SMR heater tube inspection technology and using the inspection results to increase hydrogen production.
Moderator:
Diane Dierking, Johnson Matthey
Speakers:
Scott McArthur, Phillips 66
Edgar Remedios, FOERSTER Instruments Inc.
Oliver Smith, Air Products and Chemicals
Session Start End
-
Ensuring Safe and Efficient Transitions from Full Burn to Partial Burn
Lessons Learned, Fired Heater, FCC
This session will cover KPIs and operating scenarios for partial burn FCC units, including the challenges and consequences of maloperation. Additionally, this session will focus on considerations taken to ensure safe operation of the CO Boiler. Attendees will come away with a fundamental understanding of the key principles and potential hazards associated with partial-burn operation.
Moderator:
Joe Colmone, Honeywell UOP
Speakers:
Luis Bougrat, W.R. Grace & Co.
Zach Word, Phillips 66
Speakers
Session Start End
-
Topic
Heater Health for Maximum Efficiency and Throughput
Coking, Fired Heater
Facilitator: Sam Lordo, Becht
Speakers:
Belal Hassoun, Becht
Frank Liu, Becht
Crude, Vacuum and Coker heaters can be considered the hearts of their respective process units. Monitoring the accumulation of internal tube fouling is important and challenging. This discussion will cover good practices applied to monitor fouling prone heaters with the intent to safely and reliably maximize equipment value generation and efficiency. Topics will include tube skin thermocouples, infrared thermography, Goldcup contact pyrometry and how these measurement tools can be utilized for pulse checks of the system. Key turnaround checklist items for heaters will also be discussed.
Speakers
Session Start End
-
Topic